zip

Utility for reading and creating 'zip' archives.

The zip module archives and extracts files to and from a zip archive. The zip format is specified by the "ZIP Appnote.txt" file available on PKWare's website www.pkware.com.

The zip module supports zip archive versions up to 6.1. However, password-protection and Zip64 are not supported.

By convention, the name of a zip file should end in ".zip". To abide to the convention, you'll need to add ".zip" yourself to the name.

Zip archives are created with the zip/2 or the zip/3 function. (They are also available as create, to resemble the erl_tar module.)

To extract files from a zip archive, use the unzip/1 or the unzip/2 function. (They are also available as extract.)

To fold a function over all files in a zip archive, use the foldl_3 function.

To return a list of the files in a zip archive, use the list_dir/1 or the list_dir/2 function. (They are also available as table.)

To print a list of files to the Erlang shell, use either the t/1 or tt/1 function.

In some cases, it is desirable to open a zip archive, and to unzip files from it file by file, without having to reopen the archive. The functions zip_open, zip_get, zip_list_dir and zip_close do this.

LIMITATIONS

Zip64 archives are not currently supported.

Password-protected and encrypted archives are not currently supported

Only the DEFLATE (zlib-compression) and the STORE (uncompressed data) zip methods are supported.

The size of the archive is limited to 2 G-byte (32 bits).

Comments for individual files is not supported when creating zip archives. The zip archive comment for the whole zip archive is supported.

There is currently no support for altering an existing zip archive. To add or remove a file from an archive, the whole archive must be recreated.

Types

zip_comment() = #zip_comment{comment = undefined | string()}

The record zip_comment just contains the archive comment for a zip archive

zip_file() =
            #zip_file{name = undefined | string(),
                      info = undefined | file:file_info(),
                      comment = undefined | string(),
                      offset = undefined | integer() >= 0,
                      comp_size = undefined | integer() >= 0}

The record zip_file contains the following fields.

name

the name of the file
info

file info as in file:read_file_info/1
comment

the comment for the file in the zip archive
offset

the offset of the file in the zip archive (used internally)
comp_size

the compressed size of the file (the uncompressed size is found in info)

filename() = file:filename()

The name of a zip file.

extension() = string()

extension_spec() = all
                         | [extension()]
                         | {add, [extension()]}
                         | {del, [extension()]}

create_option() = memory
                        | cooked
                        | verbose
                        | {comment, string()}
                        | {cwd, file:filename()}
                        | {compress, extension_spec()}
                        | {uncompress, extension_spec()}

These options are described in create/3.

Functions

zip(Name, FileList) -> RetValue

zip(Name, FileList, Options) -> RetValue

  • Name = file:name()
  • FileList = [FileSpec]
  • FileSpec = file:name()
             | {file:name(), binary()}
             | {file:name(), binary(), file:file_info()}
  • Options = [Option]
  • Option = memory
           | cooked
           | verbose
           | {comment, Comment}
           | {cwd, CWD}
           | {compress, What}
           | {uncompress, What}
  • What = all
         | [Extension]
         | {add, [Extension]}
         | {del, [Extension]}
  • Extension = Comment = string()
  • CWD = file:filename()
  • RetValue = {ok, FileName :: file:name()}
             | {ok, {FileName :: file:name(), binary()}}
             | {error, Reason :: term()}

create(Name, FileList) -> RetValue

create(Name, FileList, Options) -> RetValue

The zip function creates a zip archive containing the files specified in FileList.

As synonyms, the functions create/2 and create/3 are provided, to make it resemble the erl_tar module.

The file-list is a list of files, with paths relative to the current directory, they will be stored with this path in the archive. Files may also be specified with data in binaries, to create an archive directly from data.

Files will be compressed using the DEFLATE compression, as described in the Appnote.txt file. However, files will be stored without compression if they already are compressed. The zip/2 and zip/3 functions check the file extension to see whether the file should be stored without compression. Files with the following extensions are not compressed: .Z, .zip, .zoo, .arc, .lzh, .arj.

It is possible to override the default behavior and explicitly control what types of files that should be compressed by using the {compress, What} and {uncompress, What} options. It is possible to have several compress and uncompress options. In order to trigger compression of a file, its extension must match with the compress condition and must not match the uncompress condition. For example if compress is set to ["gif", "jpg"] and uncompress is set to ["jpg"], only files with "gif" as extension will be compressed. No other files will be compressed.

The following options are available:

cooked

By default, the open/2 function will open the zip file in raw mode, which is faster but does not allow a remote (erlang) file server to be used. Adding cooked to the mode list will override the default and open the zip file without the raw option. The same goes for the files added.
verbose

Print an informational message about each file being added.
memory

The output will not be to a file, but instead as a tuple {FileName, binary()}. The binary will be a full zip archive with header, and can be extracted with for instance unzip/2.
{comment, Comment}

Add a comment to the zip-archive.
{cwd, CWD}

Use the given directory as current directory, it will be prepended to file names when adding them, although it will not be in the zip-archive. (Acting like a file:set_cwd/1, but without changing the global cwd property.)
{compress, What}

Controls what types of files will be compressed. It is by default set to all. The following values of What are allowed:

all

means that all files will be compressed (as long as they pass the uncompress condition).
[Extension]

means that only files with exactly these extensions will be compressed.
{add,[Extension]}

adds these extensions to the list of compress extensions.
{del,[Extension]}

deletes these extensions from the list of compress extensions.
{uncompress, What}

Controls what types of files will be uncompressed. It is by default set to [".Z", ".zip", ".zoo", ".arc", ".lzh", ".arj"]. The following values of What are allowed:

all

means that no files will be compressed.
[Extension]

means that files with these extensions will be uncompressed.
{add,[Extension]}

adds these extensions to the list of uncompress extensions.
{del,[Extension]}

deletes these extensions from the list of uncompress extensions.

unzip(Archive) -> RetValue

  • Archive = file:name() | binary()
  • RetValue = {ok, FileList}
             | {ok, FileBinList}
             | {error, Reason :: term()}
             | {error, {Name :: file:name(), Reason :: term()}}
  • FileList = [file:name()]
  • FileBinList = [{file:name(), binary()}]

unzip(Archive, Options) -> RetValue

  • Archive = file:name() | binary()
  • Options = [Option]
  • Option = {file_list, FileList}
           | cooked
           | keep_old_files
           | verbose
           | memory
           | {file_filter, FileFilter}
           | {cwd, CWD}
  • FileList = [file:name()]
  • FileBinList = [{file:name(), binary()}]
  • FileFilter = fun((ZipFile) -> boolean())
  • CWD = file:filename()
  • ZipFile = zip_file()
  • RetValue = {ok, FileList}
             | {ok, FileBinList}
             | {error, Reason :: term()}
             | {error, {Name :: file:name(), Reason :: term()}}

extract(Archive) -> RetValue

  • Archive = file:name() | binary()
  • RetValue = {ok, FileList}
             | {ok, FileBinList}
             | {error, Reason :: term()}
             | {error, {Name :: file:name(), Reason :: term()}}
  • FileList = [file:name()]
  • FileBinList = [{file:name(), binary()}]

extract(Archive, Options) -> RetValue

  • Archive = file:name() | binary()
  • Options = [Option]
  • Option = {file_list, FileList}
           | keep_old_files
           | verbose
           | memory
           | {file_filter, FileFilter}
           | {cwd, CWD}
  • FileList = [file:name()]
  • FileBinList = [{file:name(), binary()}]
  • FileFilter = fun((ZipFile) -> boolean())
  • CWD = file:filename()
  • ZipFile = zip_file()
  • RetValue = {ok, FileList}
             | {ok, FileBinList}
             | {error, Reason :: term()}
             | {error, {Name :: file:name(), Reason :: term()}}

The unzip/1 function extracts all files from a zip archive. The unzip/2 function provides options to extract some files, and more.

If the Archive argument is given as a binary, the contents of the binary is assumed to be a zip archive, otherwise it should be a filename.

The following options are available:

{file_list, FileList}

By default, all files will be extracted from the zip archive. With the {file_list, FileList} option, the unzip/2 function will only extract the files whose names are included in FileList. The full paths, including the names of all sub directories within the zip archive, must be specified.
cooked

By default, the open/2 function will open the zip file in raw mode, which is faster but does not allow a remote (erlang) file server to be used. Adding cooked to the mode list will override the default and open the zip file without the raw option. The same goes for the files extracted.
keep_old_files

By default, all existing files with the same name as file in the zip archive will be overwritten. With the keep_old_files option, the unzip/2 function will not overwrite any existing files. Note that even with the memory option given, which means that no files will be overwritten, files existing will be excluded from the result.
verbose

Print an informational message as each file is being extracted.
memory

Instead of extracting to the current directory, the memory option will give the result as a list of tuples {Filename, Binary}, where Binary is a binary containing the extracted data of the file named Filename in the zip archive.
{cwd, CWD}

Use the given directory as current directory, it will be prepended to file names when extracting them from the zip-archive. (Acting like a file:set_cwd/1, but without changing the global cwd property.)

foldl(Fun, Acc0, Archive) -> {ok, Acc1} | {error, Reason}

  • Fun = fun((FileInArchive, GetInfo, GetBin, AccIn) -> AccOut)
  • FileInArchive = file:name()
  • GetInfo = fun(() -> file:file_info())
  • GetBin = fun(() -> binary())
  • Acc0 = Acc1 = AccIn = AccOut = term()
  • Archive = file:name() | {file:name(), binary()}
  • Reason = term()

The foldl/3 function calls Fun(FileInArchive, GetInfo , GetBin, AccIn) on successive files in the Archive, starting with AccIn == Acc0. FileInArchive is the name that the file has in the archive. GetInfo is a fun that returns info about the the file. GetBin returns the contents of the file. Both GetInfo and GetBin must be called within the Fun. Their behavior is undefined if they are called outside the context of the Fun. The Fun must return a new accumulator which is passed to the next call. foldl/3 returns the final value of the accumulator. Acc0 is returned if the archive is empty. It is not necessary to iterate over all files in the archive. The iteration may be ended prematurely in a controlled manner by throwing an exception.

For example:

> Name = "dummy.zip".
"dummy.zip"
> {ok, {Name, Bin}} = zip:create(Name, [{"foo", <<"FOO">>}, {"bar", <<"BAR">>}], [memory]).
{ok,{"dummy.zip",
     <<80,75,3,4,20,0,0,0,0,0,74,152,97,60,171,39,212,26,3,0,
       0,0,3,0,0,...>>}}
> {ok, FileSpec} = zip:foldl(fun(N, I, B, Acc) -> [{N, B(), I()} | Acc] end, [], {Name, Bin}).
{ok,[{"bar",<<"BAR">>,
      {file_info,3,regular,read_write,
                 {{2010,3,1},{19,2,10}},
                 {{2010,3,1},{19,2,10}},
                 {{2010,3,1},{19,2,10}},
                 54,1,0,0,0,0,0}},
     {"foo",<<"FOO">>,
      {file_info,3,regular,read_write,
                 {{2010,3,1},{19,2,10}},
                 {{2010,3,1},{19,2,10}},
                 {{2010,3,1},{19,2,10}},
                 54,1,0,0,0,0,0}}]}
> {ok, {Name, Bin}} = zip:create(Name, lists:reverse(FileSpec), [memory]).
{ok,{"dummy.zip",
     <<80,75,3,4,20,0,0,0,0,0,74,152,97,60,171,39,212,26,3,0,
       0,0,3,0,0,...>>}}
> catch zip:foldl(fun("foo", _, B, _) -> throw(B()); (_,_,_,Acc) -> Acc end, [], {Name, Bin}). 
<<"FOO">>

list_dir(Archive) -> RetValue

list_dir(Archive, Options) -> RetValue

  • Archive = file:name() | binary()
  • RetValue = {ok, CommentAndFiles} | {error, Reason :: term()}
  • CommentAndFiles = [zip_comment() | zip_file()]
  • Options = [Option]
  • Option = cooked

table(Archive) -> RetValue

table(Archive, Options) -> RetValue

  • Archive = file:name() | binary()
  • RetValue = {ok, CommentAndFiles} | {error, Reason :: term()}
  • CommentAndFiles = [zip_comment() | zip_file()]
  • Options = [Option]
  • Option = cooked

The list_dir/1 function retrieves the names of all files in the zip archive Archive. The list_dir/2 function provides options.

As synonyms, the functions table/2 and table/3 are provided, to make it resemble the erl_tar module.

The result value is the tuple {ok, List}, where List contains the zip archive comment as the first element.

The following options are available:

cooked

By default, the open/2 function will open the zip file in raw mode, which is faster but does not allow a remote (erlang) file server to be used. Adding cooked to the mode list will override the default and open the zip file without the raw option.

t(Archive) -> ok

  • Archive = file:name() | binary() | ZipHandle
  • ZipHandle = pid()

The t/1 function prints the names of all files in the zip archive Archive to the Erlang shell. (Similar to "tar t".)

tt(Archive) -> ok

  • Archive = file:name() | binary() | ZipHandle
  • ZipHandle = pid()

The tt/1 function prints names and information about all files in the zip archive Archive to the Erlang shell. (Similar to "tar tv".)

zip_open(Archive) -> {ok, ZipHandle} | {error, Reason}

  • Archive = file:name() | binary()
  • ZipHandle = pid()
  • Reason = term()

zip_open(Archive, Options) -> {ok, ZipHandle} | {error, Reason}

  • Archive = file:name() | binary()
  • ZipHandle = pid()
  • Options = [Option]
  • Option = cooked | memory | {cwd, CWD :: file:filename()}
  • Reason = term()

The zip_open function opens a zip archive, and reads and saves its directory. This means that subsequently reading files from the archive will be faster than unzipping files one at a time with unzip.

The archive must be closed with zip_close/1.

zip_list_dir(ZipHandle) -> {ok, Result} | {error, Reason}

The zip_list_dir/1 function returns the file list of an open zip archive. The first returned element is the zip archive comment.

zip_get(ZipHandle) -> {ok, [Result]} | {error, Reason}

zip_get(FileName, ZipHandle) -> {ok, Result} | {error, Reason}

The zip_get function extracts one or all files from an open archive.

The files will be unzipped to memory or to file, depending on the options given to the zip_open function when the archive was opened.

zip_close(ZipHandle) -> ok | {error, einval}

  • ZipHandle = pid()

The zip_close/1 function closes a zip archive, previously opened with zip_open. All resources are closed, and the handle should not be used after closing.